South-Eastern Asia - Moulded Rubber Articles - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingSouth-Eastern Asia: Market for Rubber-to-Metal and Moulded Articles 2024
Market Size for Rubber-to-Metal and Moulded Articles in South-Eastern Asia
In 2023, the Southeast Asian rubber-to-metal and moulded article market was finally on the rise to reach $X after two years of decline. The market value increased at an average annual rate of X% from 2012 to 2023; the trend pattern indicated some noticeable fluctuations being recorded in certain years. The level of consumption peaked at $X in 2016; however, from 2017 to 2023, consumption stood at a somewhat lower figure.
Production of Rubber-to-Metal and Moulded Articles in South-Eastern Asia
In value terms, rubber-to-metal and moulded article production dropped to $X in 2023 estimated in export price. The total output value increased at an average annual rate of X% from 2012 to 2023; the trend pattern remained consistent, with only minor fluctuations throughout the analyzed period. The pace of growth was the most pronounced in 2020 when the production volume increased by X%. As a result, production reached the peak level of $X. From 2021 to 2023, production growth remained at a somewhat lower figure.
Exports of Rubber-to-Metal and Moulded Articles
Exports in South-Eastern Asia
In 2023, after three years of growth, there was significant decline in overseas shipments of rubber-to-metal and moulded articles, when their volume decreased by X% to X tons. In general, exports, however, recorded a relatively flat trend pattern. The pace of growth appeared the most rapid in 2021 when exports increased by X%. The volume of export peaked at X tons in 2022, and then declined in the following year.
In value terms, rubber-to-metal and moulded article exports shrank to $X in 2023. The total export value increased at an average annual rate of X% over the period from 2012 to 2023; however, the trend pattern indicated some noticeable fluctuations being recorded throughout the analyzed period. The most prominent rate of growth was recorded in 2021 with an increase of X% against the previous year. Over the period under review, the exports reached the peak figure at $X in 2022, and then fell in the following year.
Exports by Country
In 2023, Thailand (X tons) represented the largest exporter of rubber-to-metal and moulded articles, committing X% of total exports. Malaysia (X tons) ranks second in terms of the total exports with an X% share, followed by Vietnam (X%) and Singapore (X%). Indonesia (X tons) and the Philippines (X tons) followed a long way behind the leaders.
Thailand experienced a relatively flat trend pattern with regard to volume of exports of rubber-to-metal and moulded articles. At the same time, Singapore (X%), Malaysia (X%) and the Philippines (X%) displayed positive paces of growth. Moreover, Singapore emerged as the fastest-growing exporter exported in South-Eastern Asia, with a CAGR of X% from 2012-2023. Indonesia and Vietnam experienced a relatively flat trend pattern. While the share of Malaysia (X p.p.) and Singapore (X p.p.) increased significantly in terms of the total exports from 2012-2023, the share of Vietnam (X p.p.) and Thailand (X p.p.) displayed negative dynamics. The shares of the other countries remained relatively stable throughout the analyzed period.
In value terms, Thailand ($X) remains the largest rubber-to-metal and moulded article supplier in South-Eastern Asia, comprising X% of total exports. The second position in the ranking was held by Vietnam ($X), with an X% share of total exports. It was followed by Singapore, with a X% share.
In Thailand, rubber-to-metal and moulded article exports remained relatively stable over the period from 2012-2023. The remaining exporting countries recorded the following average annual rates of exports growth: Vietnam (X% per year) and Singapore (X% per year).
Export Prices by Country
In 2023, the export price in South-Eastern Asia amounted to $X per ton, with an increase of X% against the previous year. In general, the export price continues to indicate a mild increase. The most prominent rate of growth was recorded in 2015 when the export price increased by X% against the previous year. Over the period under review, the export prices reached the peak figure at $X per ton in 2017; however, from 2018 to 2023, the export prices stood at a somewhat lower figure.
Prices varied noticeably by country of origin: amid the top suppliers, the country with the highest price was Singapore ($X per ton), while Malaysia ($X per ton) was amongst the lowest.
From 2012 to 2023, the most notable rate of growth in terms of prices was attained by Malaysia (X%), while the other leaders experienced more modest paces of growth.
Imports of Rubber-to-Metal and Moulded Articles
Imports in South-Eastern Asia
For the third consecutive year, South-Eastern Asia recorded growth in purchases abroad of rubber-to-metal and moulded articles, which increased by X% to X tons in 2023. Total imports indicated a moderate expansion from 2012 to 2023: its volume increased at an average annual rate of X% over the last eleven-year period. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2023 figures, imports increased by X% against 2015 indices. The most prominent rate of growth was recorded in 2021 with an increase of X% against the previous year. The volume of import peaked in 2023 and is expected to retain growth in years to come.
In value terms, rubber-to-metal and moulded article imports contracted to $X in 2023. The total import value increased at an average annual rate of X% from 2012 to 2023; however, the trend pattern remained relatively stable, with somewhat noticeable fluctuations in certain years. The most prominent rate of growth was recorded in 2021 with an increase of X% against the previous year. The level of import peaked at $X in 2022, and then fell in the following year.
Imports by Country
In 2023, Thailand (X tons), Malaysia (X tons), the Philippines (X tons), Indonesia (X tons) and Vietnam (X tons) represented the main importer of rubber-to-metal and moulded articles in South-Eastern Asia, making up X% of total import. Singapore (X tons) and Cambodia (X tons) held a relatively small share of total imports.
From 2012 to 2023, the biggest increases were recorded for the Philippines (with a CAGR of X%), while purchases for the other leaders experienced more modest paces of growth.
In value terms, Thailand ($X) constitutes the largest market for imported rubber-to-metal and moulded articles in South-Eastern Asia, comprising X% of total imports. The second position in the ranking was held by Vietnam ($X), with a X% share of total imports. It was followed by Indonesia, with a X% share.
From 2012 to 2023, the average annual rate of growth in terms of value in Thailand was relatively modest. In the other countries, the average annual rates were as follows: Vietnam (X% per year) and Indonesia (X% per year).
Import Prices by Country
The import price in South-Eastern Asia stood at $X per ton in 2023, waning by X% against the previous year. Over the period under review, the import price continues to indicate a noticeable shrinkage. The pace of growth appeared the most rapid in 2017 when the import price increased by X% against the previous year. Over the period under review, import prices reached the maximum at $X per ton in 2018; however, from 2019 to 2023, import prices remained at a lower figure.
Prices varied noticeably by country of destination: amid the top importers, the country with the highest price was Thailand ($X per ton), while Malaysia ($X per ton) was amongst the lowest.
From 2012 to 2023, the most notable rate of growth in terms of prices was attained by Indonesia (X%), while the other leaders experienced mixed trends in the import price figures.
Source: IndexBox Platform
This report provides an in-depth analysis of the market for rubber-to-metal and moulded article in South-Eastern Asia. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 22197345 - Rubber-to-metal bonded articles for tractors and motor vehicles
- Prodcom 2297347 -
- Prodcom 22197349 - Rubber-to-metal bonded articles for other uses than for tractors and motor vehicles
- Prodcom 22197365 - Articles of vulcanised solid rubber other than for tractors and motor vehicles
Country coverage:
- Brunei Darussalam
- Cambodia
- Indonesia
- Lao People's Democratic Republic
- Malaysia
- Myanmar
- Philippines
- Singapore
- Thailand
- Timor-Leste
- Vietnam
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Production in South-Eastern Asia, split by region and country
- Trade (exports and imports) in South-Eastern Asia
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- CONSUMPTION BY COUNTRY
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
- PRODUCTION BY COUNTRY
8. IMPORTS
The Largest Importers on The Market and How They Succeed
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Exporters on The Market and How They Succeed
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
11. COUNTRY PROFILES
The Largest Markets And Their Profiles
This Chapter is Available Only for the Professional Edition PRO- Brunei Darussalam
- Cambodia
- Indonesia
- Malaysia
- Myanmar
- Philippines
- Singapore
- Thailand
- Timor-Leste
- Vietnam
- Lao People's Democratic Republic
-
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption, By Country, 2018–2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Destination, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Origin, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Consumption, By Country, 2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Production, By Country, 2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, 2012–2023
Recommended reports
This report provides an in-depth analysis of the market for rubber-to-metal and moulded article in Asia.
This report provides an in-depth analysis of the market for rubber-to-metal and moulded article in the U.S..
This report provides an in-depth analysis of the market for rubber-to-metal and moulded article in China.
This report provides an in-depth analysis of the market for rubber-to-metal and moulded article in the EU.
This report provides an in-depth analysis of the global market for rubber-to-metal and moulded article.