Canada - Moulded Rubber Articles - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingCanada: Market for Rubber-to-Metal and Moulded Articles 2024
Market Size for Rubber-to-Metal and Moulded Articles in Canada
In 2022, after seven years of growth, there was decline in the Canadian rubber-to-metal and moulded article market, when its value decreased by X% to $X. Over the period under review, the total consumption indicated a temperate increase from 2012 to 2022: its value increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, consumption increased by X% against 2014 indices. Over the period under review, the market attained the maximum level at $X in 2021, and then contracted modestly in the following year.
Production of Rubber-to-Metal and Moulded Articles in Canada
In value terms, rubber-to-metal and moulded article production totaled $X in 2022 estimated in export price. In general, the total production indicated a measured expansion from 2012 to 2022: its value increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, production decreased by X% against 2020 indices. The growth pace was the most rapid in 2015 when the production volume increased by X%. Over the period under review, production hit record highs at $X in 2020; afterwards, it flattened through to 2022.
Exports of Rubber-to-Metal and Moulded Articles
Exports from Canada
In 2022, the amount of rubber-to-metal and moulded articles exported from Canada soared to X tons, growing by X% against the previous year's figure. Overall, total exports indicated a strong increase from 2012 to 2022: its volume increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. As a result, the exports reached the peak and are likely to continue growth in the immediate term.
In value terms, rubber-to-metal and moulded article exports stood at $X in 2022. In general, exports enjoyed prominent growth. The most prominent rate of growth was recorded in 2018 when exports increased by X%. The exports peaked in 2022 and are likely to see gradual growth in the near future.
Exports by Country
The United States (X tons) was the main destination for rubber-to-metal and moulded article exports from Canada, with a X% share of total exports. Moreover, rubber-to-metal and moulded article exports to the United States exceeded the volume sent to the second major destination, Mexico (X tons), tenfold.
From 2012 to 2022, the average annual growth rate of volume to the United States totaled X%. Exports to the other major destinations recorded the following average annual rates of exports growth: Mexico (X% per year) and the UK (X% per year).
In value terms, the United States ($X) remains the key foreign market for rubber-to-metal and moulded articles exports from Canada, comprising X% of total exports. The second position in the ranking was taken by Mexico ($X), with an X% share of total exports.
From 2012 to 2022, the average annual rate of growth in terms of value to the United States amounted to X%. Exports to the other major destinations recorded the following average annual rates of exports growth: Mexico (X% per year) and the UK (X% per year).
Export Prices by Country
In 2022, the average rubber-to-metal and moulded article export price amounted to $X per ton, which is down by X% against the previous year. Over the last decade, it increased at an average annual rate of X%. The most prominent rate of growth was recorded in 2021 an increase of X%. As a result, the export price reached the peak level of $X per ton, and then dropped dramatically in the following year.
Average prices varied noticeably for the major foreign markets. In 2022, amid the top suppliers, the country with the highest price was the United States ($X per ton), while the average price for exports to Mexico ($X per ton) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was recorded for supplies to the United States (X%), while the prices for the other major destinations experienced more modest paces of growth.
Imports of Rubber-to-Metal and Moulded Articles
Imports into Canada
In 2022, approx. X tons of rubber-to-metal and moulded articles were imported into Canada; which is down by X% against the previous year. In general, total imports indicated a tangible increase from 2012 to 2022: its volume increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, imports increased by X% against 2020 indices. The pace of growth was the most pronounced in 2021 when imports increased by X% against the previous year. As a result, imports attained the peak of X tons, and then contracted in the following year.
In value terms, rubber-to-metal and moulded article imports skyrocketed to $X in 2022. Overall, total imports indicated a resilient expansion from 2012 to 2022: its value increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, imports increased by X% against 2020 indices. The growth pace was the most rapid in 2021 when imports increased by X% against the previous year. Imports peaked in 2022 and are expected to retain growth in years to come.
Imports by Country
The United States (X tons), China (X tons) and Mexico (X tons) were the main suppliers of rubber-to-metal and moulded article imports to Canada, with a combined X% share of total imports.
From 2012 to 2022, the most notable rate of growth in terms of purchases, amongst the main suppliers, was attained by Mexico (with a CAGR of X%), while imports for the other leaders experienced more modest paces of growth.
In value terms, the United States ($X), China ($X) and Mexico ($X) appeared to be the largest rubber-to-metal and moulded article suppliers to Canada, together accounting for X% of total imports.
Among the main suppliers, Mexico, with a CAGR of X%, saw the highest rates of growth with regard to the value of imports, over the period under review, while purchases for the other leaders experienced more modest paces of growth.
Import Prices by Country
In 2022, the average rubber-to-metal and moulded article import price amounted to $X per ton, surging by X% against the previous year. Over the last decade, it increased at an average annual rate of X%. As a result, import price attained the peak level and is likely to continue growth in the immediate term.
Average prices varied noticeably amongst the major supplying countries. In 2022, amid the top importers, the highest price was recorded for prices from Mexico ($X per ton) and the United States ($X per ton), while the price for Thailand ($X per ton) and India ($X per ton) were amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was attained by Mexico (X%), while the prices for the other major suppliers experienced more modest paces of growth.
Source: IndexBox Platform
Frequently Asked Questions (FAQ) :
This report provides an in-depth analysis of the market for rubber-to-metal and moulded article in Canada. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 22197345 - Rubber-to-metal bonded articles for tractors and motor vehicles
- Prodcom 2297347 -
- Prodcom 22197349 - Rubber-to-metal bonded articles for other uses than for tractors and motor vehicles
- Prodcom 22197365 - Articles of vulcanised solid rubber other than for tractors and motor vehicles
Country coverage:
- Canada
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Trade (exports and imports) in Canada
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- MARKET STRUCTURE
- TRADE BALANCE
- PER CAPITA CONSUMPTION
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
8. IMPORTS
The Largest Import Supplying Countries
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Destinations for Exports
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption In 2012-2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Origin, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Destination, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Market Structure – Domestic Supply vs. Imports, In Physical Terms, 2012-2023
- Market Structure – Domestic Supply vs. Imports, In Value Terms, 2012-2023
- Trade Balance, In Physical Terms, 2012-2023
- Trade Balance, In Value Terms, 2012-2023
- Per Capita Consumption, 2012-2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Origin, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Destination, 2012–2023
Recommended reports
This report provides an in-depth analysis of the market for rubber-to-metal and moulded article in Asia.
This report provides an in-depth analysis of the market for rubber-to-metal and moulded article in the U.S..
This report provides an in-depth analysis of the market for rubber-to-metal and moulded article in China.
This report provides an in-depth analysis of the market for rubber-to-metal and moulded article in the EU.
This report provides an in-depth analysis of the global market for rubber-to-metal and moulded article.
- Price for Rubber-To-Metal and Moulded Article Canada
- Rubber-To-Metal and Moulded Article Market
- Frozen and Fresh or Chilled Skipjack Tuna Market
- Frozen Market
- Frozen Scallops Market
- Jellyfish Market
- Non-Citrus Fruits not Elsewhere Classified Market
- Battered Fish Fillet Market
- Fluorine, Chlorine, Bromine and Iodine Market
- Crispbread Market