Uganda - Tubes, Pipes and Hollow Profiles (Of Iron or Steel) - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingUganda: Market for Tubes, Pipes And Hollow Profiles (Of Iron Or Steel) 2024
Market Size for Tubes, Pipes And Hollow Profiles (Of Iron Or Steel) in Uganda
The Ugandan market for tubes, pipes and hollow profiles (of iron or steel) rose to $X in 2022, growing by X% against the previous year. Overall, the total consumption indicated measured growth from 2012 to 2022: its value increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, consumption decreased by X% against 2020 indices. Consumption of peaked at $X in 2020; afterwards, it flattened through to 2022.
Production of Tubes, Pipes And Hollow Profiles (Of Iron Or Steel) in Uganda
In value terms, production of tubes, pipes and hollow profiles (of iron or steel) expanded slightly to $X in 2022 estimated in export price. Over the period under review, the total production indicated a perceptible expansion from 2012 to 2022: its value increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, production decreased by X% against 2020 indices. The most prominent rate of growth was recorded in 2017 with an increase of X% against the previous year. Over the period under review, production of attained the maximum level at $X in 2020; however, from 2021 to 2022, production failed to regain momentum.
Exports of Tubes, Pipes And Hollow Profiles (Of Iron Or Steel)
Exports from Uganda
In 2022, approx. X tons of tubes, pipes and hollow profiles (of iron or steel) were exported from Uganda; dropping by X% against 2021. In general, exports saw a abrupt slump. The most prominent rate of growth was recorded in 2017 with an increase of X%. As a result, the exports attained the peak of X tons. From 2018 to 2022, the growth of the exports of remained at a lower figure.
In value terms, exports of tubes, pipes and hollow profiles (of iron or steel) dropped significantly to $X in 2022. Over the period under review, exports faced a abrupt curtailment. The most prominent rate of growth was recorded in 2017 when exports increased by X% against the previous year. The exports peaked at $X in 2012; however, from 2013 to 2022, the exports stood at a somewhat lower figure.
Exports by Country
South Sudan (X tons), Democratic Republic of the Congo (X tons) and Burundi (X tons) were the main destinations of exports of tubes, pipes and hollow profiles (of iron or steel) from Uganda, with a combined X% share of total exports. Kenya and Rwanda lagged somewhat behind, together accounting for a further X%.
From 2012 to 2022, the most notable rate of growth in terms of shipments, amongst the main countries of destination, was attained by Kenya (with a CAGR of X%), while the other leaders experienced more modest paces of growth.
In value terms, the largest markets for iron or steel pipe and tube exported from Uganda were South Sudan ($X), Democratic Republic of the Congo ($X) and Burundi ($X), together comprising X% of total exports. Kenya and Rwanda lagged somewhat behind, together comprising a further X%.
In terms of the main countries of destination, Kenya, with a CAGR of X%, saw the highest growth rate of the value of exports, over the period under review, while shipments for the other leaders experienced more modest paces of growth.
Export Prices by Country
The average export price for tubes, pipes and hollow profiles (of iron or steel) stood at $X per ton in 2022, reducing by X% against the previous year. Over the period under review, the export price continues to indicate a pronounced slump. The most prominent rate of growth was recorded in 2018 when the average export price increased by X%. Over the period under review, the average export prices reached the peak figure at $X per ton in 2012; however, from 2013 to 2022, the export prices failed to regain momentum.
Average prices varied somewhat for the major overseas markets. In 2022, amid the top suppliers, the highest price was recorded for prices to Democratic Republic of the Congo ($X per ton) and Rwanda ($X per ton), while the average price for exports to Kenya ($X per ton) and Burundi ($X per ton) were amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was recorded for supplies to Sudan (X%), while the prices for the other major destinations experienced a decline.
Imports of Tubes, Pipes And Hollow Profiles (Of Iron Or Steel)
Imports into Uganda
In 2022, imports of tubes, pipes and hollow profiles (of iron or steel) into Uganda contracted to X tons, shrinking by X% on the previous year. Overall, total imports indicated a buoyant increase from 2012 to 2022: its volume increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, imports increased by X% against 2020 indices. The most prominent rate of growth was recorded in 2013 with an increase of X% against the previous year. Over the period under review, imports of attained the peak figure at X tons in 2018; however, from 2019 to 2022, imports failed to regain momentum.
In value terms, imports of tubes, pipes and hollow profiles (of iron or steel) surged to $X in 2022. In general, imports, however, saw a prominent increase. The growth pace was the most rapid in 2013 when imports increased by X% against the previous year. Over the period under review, imports of hit record highs in 2022 and are likely to see gradual growth in years to come.
Imports by Country
The United Arab Emirates (X tons), China (X tons) and India (X tons) were the main suppliers of imports of tubes, pipes and hollow profiles (of iron or steel) to Uganda, with a combined X% share of total imports.
From 2012 to 2022, the biggest increases were recorded for the United Arab Emirates (with a CAGR of X%), while purchases for the other leaders experienced more modest paces of growth.
In value terms, the United Arab Emirates ($X) constituted the largest supplier of tubes, pipes and hollow profiles (of iron or steel) to Uganda, comprising X% of total imports. The second position in the ranking was held by China ($X), with a X% share of total imports. It was followed by India, with a X% share.
From 2012 to 2022, the average annual rate of growth in terms of value from the United Arab Emirates amounted to X%. The remaining supplying countries recorded the following average annual rates of imports growth: China (X% per year) and India (X% per year).
Import Prices by Country
The average import price for tubes, pipes and hollow profiles (of iron or steel) stood at $X per ton in 2022, surging by X% against the previous year. In general, import price indicated a tangible expansion from 2012 to 2022: its price increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, import price for tubes, pipes and hollow profiles (of iron or steel) increased by X% against 2016 indices. As a result, import price attained the peak level and is likely to continue growth in the immediate term.
There were significant differences in the average prices amongst the major supplying countries. In 2022, amid the top importers, the country with the highest price was Indonesia ($X per ton), while the price for Kenya ($X per ton) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was attained by the United Arab Emirates (X%), while the prices for the other major suppliers experienced a decline.
Source: IndexBox Platform
Frequently Asked Questions (FAQ) :
This report provides an in-depth analysis of the market for iron or steel pipe and tube in Uganda. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 24201110 - Line pipe, of a kind used for oil or gas pipelines, seamless, of stainless steel
- Prodcom 24201150 - Line pipe, of a kind used for oil or gas pipelines, seamless, of steel other than stainless steel
- Prodcom 24201210 - Casing, tubing and drill pipe, of a kind used in the drilling for oil or gas, seamless, of stainless steel
- Prodcom 24201250 - Casing, tubing and drill pipe, of a kind used in the drilling for oil or gas, seamless, of steel other than stainless steel
- Prodcom 24201310 - Tubes and pipes, of circular cross-section, seamless, of stainless steel (excluding line pipe of a kind used for oil or gas pipelines and casing, tubing and drill pipe used for oil or gas drilling)
- Prodcom 24201330 - Precision tubes and pipes, of circular cross-section, colddrawn or cold-rolled, seamless, of steel other than stainless steel
- Prodcom 24201350 - Tubes and pipes, of circular cross-section, cold-drawn or coldrolled, s eamless, of steel other than stainless steel (excluding precision tubes and pipes)
- Prodcom 24201370 - Tubes and pipes, of circular cross-section, hot-finished, s eamless, of steel other than stainless steel (excluding line pipe of a kind used for oil or gas pipelines and casing, tubing and drill-pipe used for oil or gas drilling)
- Prodcom 24201400 - Tubes and pipes, of non-circular cross-section, seamless, a nd hollow profiles, seamless, of steel
- Prodcom 24202110 - Line pipe, of a kind used for oil or gas pipelines, longitudinally welded, of an external diameter > .406,4 mm, of steel
- Prodcom 24202150 - Line pipe, of a kind used for oil or gas pipelines, other than longitudinally welded, of an external diameter > .406,4 mm, of steel
- Prodcom 24202200 - Casing, of a kind used in drilling for oil or gas, welded, of an external diameter > .406,4 mm, of steel
- Prodcom 24202300 - Tubes and pipes, welded, of an external diameter > .406,4 mm, of steel (excluding line pipe of a kind used for oil or gas pipelines and casing used for oil or gas drilling)
- Prodcom 24202400 - Tubes and pipes, riveted or similarly closed, of an external diameter > .406,4 mm, of steel (excluding line pipe for oil and gas pipelines, casing used for oil or gas drilling and welded tubes and pipes)
- Prodcom 24203110 - Line pipe, of a kind used for oil or gas pipelines, longitudinally or spirally welded, of an external diameter . .406,4 mm, of stainless steel
- Prodcom 24203150 - Line pipe, of a kind used for oil or gas pipelines, longitudinally or spirally welded, of an external diameter . .406,4 mm, of steel other than stainless steel
- Prodcom 24203210 - Casing and tubing, of a kind used in drilling for oil or gas, w elded, of an external diameter . .406,4 mm, of stainless steel
- Prodcom 24203250 - Casing and tubing, of a kind used in drilling for oil or gas, w elded, of an external diameter . .406,4 mm, of steel other than stainless steel
- Prodcom 24203310 - Tubes and pipes, of circular cross-section, welded, of an external diameter . .406,4 mm, of stainless steel (excluding line pipe of a kind used for oil or gas pipelines, and casing and tubing used for oil or gas drilling)
- Prodcom 24203340 - Precision tubes and pipes, of circular cross-section, welded, o f an external diameter . .406,4 mm, of steel other than stainless steel
- Prodcom 24203370 - Tubes and pipes, of circular cross-section, hot- or coldformed and welded, of an external diameter . .406,4 mm, of steel other than stainless steel
- Prodcom 24203410 - Tubes and pipes, of non-circular cross-section, hot- or coldformed and welded, of stainless steel
- Prodcom 24203430 - Tubes and pipes, of square or rectangular cross-section, of a wall thickness . 2 mm, hotor cold-formed and welded, of steel other than stainless steel
- Prodcom 24203450 - Tubes and pipes, of square or rectangular cross-section, of a wall thickness > 2 mm, hot-or cold-formed and welded, of steel other than stainless steel
- Prodcom 24203470 - Tubes and pipes, of other non-circular cross-section than square or rectangular, hot- or cold-formed and welded, of steel other than stainless steel
- Prodcom 24203500 - Tubes and pipes, open seam, riveted or similarly closed, of steel (excluding line pipe for oil and gas pipelines, casing and tubing used for oil or gas drilling and other welded tubes and pipes)
- Prodcom 24512000 - Tubes, pipes and hollow profiles of cast iron excluding tubes, p ipes, hollow profiles made into identifiable parts of articles, s uch as sections of central heating radiators and machinery parts
Country coverage:
- Uganda
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Trade (exports and imports) in Uganda
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- MARKET STRUCTURE
- TRADE BALANCE
- PER CAPITA CONSUMPTION
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
8. IMPORTS
The Largest Import Supplying Countries
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Destinations for Exports
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption In 2012-2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Origin, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Destination, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Market Structure – Domestic Supply vs. Imports, In Physical Terms, 2012-2023
- Market Structure – Domestic Supply vs. Imports, In Value Terms, 2012-2023
- Trade Balance, In Physical Terms, 2012-2023
- Trade Balance, In Value Terms, 2012-2023
- Per Capita Consumption, 2012-2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Origin, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Destination, 2012–2023
Recommended reports
This report provides an in-depth analysis of the market for iron or steel pipe and tube in Asia.
This report provides an in-depth analysis of the market for iron or steel pipe and tube in the U.S..
This report provides an in-depth analysis of the market for iron or steel pipe and tube in China.
This report provides an in-depth analysis of the market for iron or steel pipe and tube in the EU.
This report provides an in-depth analysis of the global market for iron or steel pipe and tube.