Report South-Eastern Asia - Pumps for Dispensing Liquids - Market Analysis, Forecast, Size, Trends and Insights for 499$
Report Update May 1, 2024

South-Eastern Asia - Pumps for Dispensing Liquids - Market Analysis, Forecast, Size, Trends and Insights

Single report
Sent by email within 24h (Mon-Fri)
Subscription
Online access and download
from $350/month

Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.

View Pricing

South-Eastern Asia: Liquid Dispensing Pump Market 2024

Liquid Dispensing Pump Market Size in South-Eastern Asia

The Southeast Asian liquid dispensing pump market surged to $X in 2022, increasing by X% against the previous year. The total consumption indicated a modest expansion from 2012 to 2022: its value increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, consumption decreased by X% against 2020 indices. Over the period under review, the market attained the maximum level at $X in 2016; however, from 2017 to 2022, consumption stood at a somewhat lower figure.

Liquid Dispensing Pump Production in South-Eastern Asia

In value terms, liquid dispensing pump production surged to $X in 2022 estimated in export price. In general, production posted a strong expansion. The most prominent rate of growth was recorded in 2020 when the production volume increased by X% against the previous year. As a result, production reached the peak level of $X. From 2021 to 2022, production growth remained at a somewhat lower figure.

Liquid Dispensing Pump Exports

Exports in South-Eastern Asia

In 2022, the amount of pumps for dispensing liquids exported in South-Eastern Asia declined to X units, with a decrease of X% compared with the previous year's figure. Over the period under review, exports showed a relatively flat trend pattern. The growth pace was the most rapid in 2018 when exports increased by X% against the previous year. The volume of export peaked at X units in 2021, and then shrank in the following year.

In value terms, liquid dispensing pump exports reduced to $X in 2022. Overall, exports showed a noticeable downturn. The growth pace was the most rapid in 2021 when exports increased by X%. Over the period under review, the exports attained the maximum at $X in 2013; however, from 2014 to 2022, the exports failed to regain momentum.

Exports by Country

Singapore was the major exporting country with an export of about X units, which amounted to X% of total exports. It was distantly followed by Malaysia (X units) and Thailand (X units), together creating a X% share of total exports.

Singapore was also the fastest-growing in terms of the pumps for dispensing liquids exports, with a CAGR of X% from 2012 to 2022. Thailand (X%) and Malaysia (X%) illustrated a downward trend over the same period. From 2012 to 2022, the share of Singapore increased by X percentage points.

In value terms, Singapore ($X) remains the largest liquid dispensing pump supplier in South-Eastern Asia, comprising X% of total exports. The second position in the ranking was taken by Thailand ($X), with an X% share of total exports.

In Singapore, liquid dispensing pump exports shrank by an average annual rate of X% over the period from 2012-2022. In the other countries, the average annual rates were as follows: Thailand (X% per year) and Malaysia (X% per year).

Export Prices by Country

The export price in South-Eastern Asia stood at $X per unit in 2022, approximately equating the previous year. In general, the export price recorded a pronounced descent. The growth pace was the most rapid in 2013 an increase of X% against the previous year. The level of export peaked at $X per unit in 2016; however, from 2017 to 2022, the export prices remained at a lower figure.

Prices varied noticeably by country of origin: amid the top suppliers, the country with the highest price was Singapore ($X per unit), while Malaysia ($X per unit) was amongst the lowest.

From 2012 to 2022, the most notable rate of growth in terms of prices was attained by Singapore (X%), while the other leaders experienced a decline in the export price figures.

Liquid Dispensing Pump Imports

Imports in South-Eastern Asia

In 2022, supplies from abroad of pumps for dispensing liquids increased by X% to X units, rising for the second year in a row after two years of decline. The total import volume increased at an average annual rate of X% from 2012 to 2022; however, the trend pattern indicated some noticeable fluctuations being recorded throughout the analyzed period. The most prominent rate of growth was recorded in 2021 with an increase of X% against the previous year. Over the period under review, imports hit record highs at X units in 2018; however, from 2019 to 2022, imports remained at a lower figure.

In value terms, liquid dispensing pump imports totaled $X in 2022. In general, imports, however, showed a deep slump. The growth pace was the most rapid in 2018 when imports increased by X%. Over the period under review, imports reached the maximum at $X in 2012; however, from 2013 to 2022, imports failed to regain momentum.

Imports by Country

Malaysia was the largest importing country with an import of around X units, which finished at X% of total imports. It was distantly followed by Singapore (X units), Thailand (X units), Indonesia (X units) and Vietnam (X units), together creating a X% share of total imports. The following importers - Myanmar (X units) and the Philippines (X units) - each reached a X% share of total imports.

From 2012 to 2022, the biggest increases were recorded for Malaysia (with a CAGR of X%), while purchases for the other leaders experienced more modest paces of growth.

In value terms, the largest liquid dispensing pump importing markets in South-Eastern Asia were Indonesia ($X), Singapore ($X) and Thailand ($X), together comprising X% of total imports. Vietnam, Malaysia, the Philippines and Myanmar lagged somewhat behind, together comprising a further X%.

In terms of the main importing countries, Vietnam, with a CAGR of X%, saw the highest growth rate of the value of imports, over the period under review, while purchases for the other leaders experienced mixed trends in the imports figures.

Import Prices by Country

In 2022, the import price in South-Eastern Asia amounted to $X per unit, waning by X% against the previous year. Over the period under review, the import price saw a deep setback. The growth pace was the most rapid in 2019 an increase of X% against the previous year. Over the period under review, import prices reached the maximum at $X per unit in 2012; however, from 2013 to 2022, import prices stood at a somewhat lower figure.

There were significant differences in the average prices amongst the major importing countries. In 2022, amid the top importers, the country with the highest price was Vietnam ($X per unit), while Myanmar ($X per unit) was amongst the lowest.

From 2012 to 2022, the most notable rate of growth in terms of prices was attained by the Philippines (X%), while the other leaders experienced a decline in the import price figures.

Source: IndexBox Platform

Frequently Asked Questions (FAQ) :

The countries with the highest volumes of consumption in 2023 were Singapore, Malaysia and Thailand, together accounting for 76% of total consumption.
The country with the largest volume of liquid dispensing pump production was Singapore, comprising approx. 49% of total volume. Moreover, liquid dispensing pump production in Singapore exceeded the figures recorded by the second-largest producer, Thailand, twofold. The third position in this ranking was taken by the Philippines, with a 16% share.
In value terms, Singapore remains the largest liquid dispensing pump supplier in South-Eastern Asia, comprising 82% of total exports. The second position in the ranking was held by Thailand, with an 11% share of total exports.
In value terms, the largest liquid dispensing pump importing markets in South-Eastern Asia were Indonesia, Singapore and Thailand, together accounting for 66% of total imports. Vietnam, Malaysia, the Philippines and Myanmar lagged somewhat behind, together accounting for a further 30%.
The export price in South-Eastern Asia stood at $220 per unit in 2022, approximately equating the previous year.
The import price in South-Eastern Asia stood at $128 per unit in 2022, shrinking by -6.2% against the previous year.

This report provides an in-depth analysis of the liquid dispensing pump market in South-Eastern Asia. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.

Product coverage:

  • Prodcom 28131125 - Pumps for dispensing liquids, fitted or designed to be fitted with a measuring device (excluding for fuel or lubricants)

Country coverage:

Data coverage:

  • Market volume and value
  • Per Capita consumption
  • Forecast of the market dynamics in the medium term
  • Production in South-Eastern Asia, split by region and country
  • Trade (exports and imports) in South-Eastern Asia
  • Export and import prices
  • Market trends, drivers and restraints
  • Key market players and their profiles

Reasons to buy this report:

  • Take advantage of the latest data
  • Find deeper insights into current market developments
  • Discover vital success factors affecting the market

This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.

In this report, you can find information that helps you to make informed decisions on the following issues:

  1. How to diversify your business and benefit from new market opportunities
  2. How to load your idle production capacity
  3. How to boost your sales on overseas markets
  4. How to increase your profit margins
  5. How to make your supply chain more sustainable
  6. How to reduce your production and supply chain costs
  7. How to outsource production to other countries
  8. How to prepare your business for global expansion

While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.

  1. 1. INTRODUCTION

    Making Data-Driven Decisions to Grow Your Business

    1. REPORT DESCRIPTION
    2. RESEARCH METHODOLOGY AND AI PLATFORM
    3. DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
    4. GLOSSARY AND SPECIFIC TERMS
  2. 2. EXECUTIVE SUMMARY

    A Quick Overview of Market Performance

    1. KEY FINDINGS
    2. MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
  3. 3. MARKET OVERVIEW

    Understanding the Current State of The Market and Its Prospects

    1. MARKET SIZE
    2. CONSUMPTION BY COUNTRY
    3. MARKET FORECAST TO 2030
  4. 4. MOST PROMISING PRODUCT

    Finding New Products to Diversify Your Business

    This Chapter is Available Only for the Professional Edition PRO
    1. TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
    2. BEST-SELLING PRODUCTS
    3. MOST CONSUMED PRODUCT
    4. MOST TRADED PRODUCT
    5. MOST PROFITABLE PRODUCT FOR EXPORT
  5. 5. MOST PROMISING SUPPLYING COUNTRIES

    Choosing the Best Countries to Establish Your Sustainable Supply Chain

    This Chapter is Available Only for the Professional Edition PRO
    1. TOP COUNTRIES TO SOURCE YOUR PRODUCT
    2. TOP PRODUCING COUNTRIES
    3. TOP EXPORTING COUNTRIES
    4. LOW-COST EXPORTING COUNTRIES
  6. 6. MOST PROMISING OVERSEAS MARKETS

    Choosing the Best Countries to Boost Your Exports

    This Chapter is Available Only for the Professional Edition PRO
    1. TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
    2. TOP CONSUMING MARKETS
    3. UNSATURATED MARKETS
    4. TOP IMPORTING MARKETS
    5. MOST PROFITABLE MARKETS
  7. 7. PRODUCTION

    The Latest Trends and Insights into The Industry

    1. PRODUCTION VOLUME AND VALUE
    2. PRODUCTION BY COUNTRY
  8. 8. IMPORTS

    The Largest Importers on The Market and How They Succeed

    1. IMPORTS FROM 2012–2023
    2. IMPORTS BY COUNTRY
    3. IMPORT PRICES BY COUNTRY
  9. 9. EXPORTS

    The Largest Exporters on The Market and How They Succeed

    1. EXPORTS FROM 2012–2023
    2. EXPORTS BY COUNTRY
    3. EXPORT PRICES BY COUNTRY
  10. 10. PROFILES OF MAJOR PRODUCERS

    The Largest Producers on The Market and Their Profiles

    This Chapter is Available Only for the Professional Edition PRO
  11. 11. COUNTRY PROFILES

    The Largest Markets And Their Profiles

    This Chapter is Available Only for the Professional Edition PRO
    • Brunei Darussalam
    • Cambodia
    • Indonesia
    • Malaysia
    • Myanmar
    • Philippines
    • Singapore
    • Thailand
    • Timor-Leste
    • Vietnam
    • Lao People's Democratic Republic
  12. LIST OF TABLES

    1. Key Findings In 2023
    2. Market Volume, In Physical Terms, 2012–2023
    3. Market Value, 2012–2023
    4. Per Capita Consumption, By Country, 2018–2023
    5. Production, In Physical Terms, By Country, 2012–2023
    6. Imports, In Physical Terms, By Country, 2012–2023
    7. Imports, In Value Terms, By Country, 2012–2023
    8. Import Prices, By Country Of Destination, 2012–2023
    9. Exports, In Physical Terms, By Country, 2012–2023
    10. Exports, In Value Terms, By Country, 2012–2023
    11. Export Prices, By Country Of Origin, 2012–2023
  13. LIST OF FIGURES

    1. Market Volume, In Physical Terms, 2012–2023
    2. Market Value, 2012–2023
    3. Consumption, By Country, 2023
    4. Market Volume Forecast to 2030
    5. Market Value Forecast to 2030
    6. Products: Market Size And Growth, By Type
    7. Products: Average Per Capita Consumption, By Type
    8. Products: Exports And Growth, By Type
    9. Products: Export Prices And Growth, By Type
    10. Production Volume And Growth
    11. Exports And Growth
    12. Export Prices And Growth
    13. Market Size And Growth
    14. Per Capita Consumption
    15. Imports And Growth
    16. Import Prices
    17. Production, In Physical Terms, 2012–2023
    18. Production, In Value Terms, 2012–2023
    19. Production, By Country, 2023
    20. Production, In Physical Terms, By Country, 2012–2023
    21. Imports, In Physical Terms, 2012–2023
    22. Imports, In Value Terms, 2012–2023
    23. Imports, In Physical Terms, By Country, 2023
    24. Imports, In Physical Terms, By Country, 2012–2023
    25. Imports, In Value Terms, By Country, 2012–2023
    26. Import Prices, By Country, 2012–2023
    27. Exports, In Physical Terms, 2012–2023
    28. Exports, In Value Terms, 2012–2023
    29. Exports, In Physical Terms, By Country, 2023
    30. Exports, In Physical Terms, By Country, 2012–2023
    31. Exports, In Value Terms, By Country, 2012–2023
    32. Export Prices, 2012–2023

Recommended reports

Free Data: Pumps For Dispensing Liquids - South-Eastern Asia