South-Eastern Asia - Polycarbonates (In Primary Forms) - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingSouth-Eastern Asia: Polycarbonate Market 2024
Polycarbonate Market Size in South-Eastern Asia
The Southeast Asian polycarbonate market dropped to $X in 2023, standing approx. at the previous year. The total consumption indicated a noticeable expansion from 2012 to 2023: its value increased at an average annual rate of X% over the last eleven-year period. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2023 figures, consumption decreased by X% against 2021 indices. As a result, consumption attained the peak level of $X; afterwards, it flattened through to 2023.
Polycarbonate Production in South-Eastern Asia
In value terms, polycarbonate production expanded notably to $X in 2023 estimated in export price. Overall, production recorded a pronounced reduction. The most prominent rate of growth was recorded in 2021 with an increase of X% against the previous year. The level of production peaked at $X in 2012; however, from 2013 to 2023, production failed to regain momentum.
Polycarbonate Exports
Exports in South-Eastern Asia
Polycarbonate exports fell remarkably to X tons in 2023, shrinking by X% compared with 2022. Overall, exports showed a noticeable decrease. The most prominent rate of growth was recorded in 2018 when exports increased by X%. Over the period under review, the exports reached the maximum at X tons in 2014; however, from 2015 to 2023, the exports remained at a lower figure.
In value terms, polycarbonate exports declined rapidly to $X in 2023. Over the period under review, exports recorded a pronounced downturn. The pace of growth appeared the most rapid in 2021 with an increase of X%. Over the period under review, the exports attained the peak figure at $X in 2012; however, from 2013 to 2023, the exports failed to regain momentum.
Exports by Country
Thailand was the major exporting country with an export of about X tons, which amounted to X% of total exports. Malaysia (X tons) held the second position in the ranking, followed by Singapore (X tons). All these countries together held near X% share of total exports. Vietnam (X tons) and Indonesia (X tons) held a relatively small share of total exports.
Thailand experienced a relatively flat trend pattern with regard to volume of exports of polycarbonates (in primary forms). At the same time, Vietnam (X%), Indonesia (X%) and Malaysia (X%) displayed positive paces of growth. Moreover, Vietnam emerged as the fastest-growing exporter exported in South-Eastern Asia, with a CAGR of X% from 2012-2023. By contrast, Singapore (X%) illustrated a downward trend over the same period. From 2012 to 2023, the share of Thailand, Malaysia, Vietnam and Indonesia increased by X, X, X and X percentage points, respectively.
In value terms, Thailand ($X) remains the largest polycarbonate supplier in South-Eastern Asia, comprising X% of total exports. The second position in the ranking was held by Singapore ($X), with a X% share of total exports. It was followed by Malaysia, with a X% share.
From 2012 to 2023, the average annual rate of growth in terms of value in Thailand was relatively modest. The remaining exporting countries recorded the following average annual rates of exports growth: Singapore (X% per year) and Malaysia (X% per year).
Export Prices by Country
In 2023, the export price in South-Eastern Asia amounted to $X per ton, reducing by X% against the previous year. Over the period under review, the export price saw a slight descent. The most prominent rate of growth was recorded in 2021 when the export price increased by X% against the previous year. Over the period under review, the export prices hit record highs at $X per ton in 2018; however, from 2019 to 2023, the export prices remained at a lower figure.
There were significant differences in the average prices amongst the major exporting countries. In 2023, amid the top suppliers, the country with the highest price was Singapore ($X per ton), while Indonesia ($X per ton) was amongst the lowest.
From 2012 to 2023, the most notable rate of growth in terms of prices was attained by Vietnam (X%), while the other leaders experienced a decline in the export price figures.
Polycarbonate Imports
Imports in South-Eastern Asia
In 2023, polycarbonate imports in South-Eastern Asia reduced rapidly to X tons, with a decrease of X% on the previous year's figure. Total imports indicated pronounced growth from 2012 to 2023: its volume increased at an average annual rate of X% over the last eleven years. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2023 figures, imports decreased by X% against 2021 indices. The most prominent rate of growth was recorded in 2021 with an increase of X%. As a result, imports reached the peak of X tons. From 2022 to 2023, the growth of imports failed to regain momentum.
In value terms, polycarbonate imports fell notably to $X in 2023. Total imports indicated a mild expansion from 2012 to 2023: its value increased at an average annual rate of X% over the last eleven-year period. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2023 figures, imports decreased by X% against 2021 indices. The growth pace was the most rapid in 2021 when imports increased by X%. As a result, imports reached the peak of $X. From 2022 to 2023, the growth of imports remained at a lower figure.
Imports by Country
The countries with the highest levels of polycarbonate imports in 2023 were Vietnam (X tons), Indonesia (X tons), Malaysia (X tons), Singapore (X tons) and Thailand (X tons), together reaching X% of total import. The Philippines (X tons) took a little share of total imports.
From 2012 to 2023, the most notable rate of growth in terms of purchases, amongst the main importing countries, was attained by the Philippines (with a CAGR of X%), while imports for the other leaders experienced more modest paces of growth.
In value terms, Vietnam ($X) constitutes the largest market for imported polycarbonates (in primary forms) in South-Eastern Asia, comprising X% of total imports. The second position in the ranking was taken by Malaysia ($X), with a X% share of total imports. It was followed by Indonesia, with a X% share.
From 2012 to 2023, the average annual rate of growth in terms of value in Vietnam stood at X%. The remaining importing countries recorded the following average annual rates of imports growth: Malaysia (X% per year) and Indonesia (X% per year).
Import Prices by Country
In 2023, the import price in South-Eastern Asia amounted to $X per ton, which is down by X% against the previous year. Overall, the import price saw a relatively flat trend pattern. The growth pace was the most rapid in 2021 an increase of X%. The level of import peaked at $X per ton in 2018; however, from 2019 to 2023, import prices remained at a lower figure.
There were significant differences in the average prices amongst the major importing countries. In 2023, amid the top importers, the country with the highest price was the Philippines ($X per ton), while Indonesia ($X per ton) was amongst the lowest.
From 2012 to 2023, the most notable rate of growth in terms of prices was attained by Vietnam (X%), while the other leaders experienced mixed trends in the import price figures.
Source: IndexBox Platform
This report provides an in-depth analysis of the polycarbonate market in South-Eastern Asia. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 20164040 - Polycarbonates, in primary forms
Country coverage:
- Brunei Darussalam
- Cambodia
- Indonesia
- Lao People's Democratic Republic
- Malaysia
- Myanmar
- Philippines
- Singapore
- Thailand
- Timor-Leste
- Vietnam
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Production in South-Eastern Asia, split by region and country
- Trade (exports and imports) in South-Eastern Asia
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- CONSUMPTION BY COUNTRY
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
- PRODUCTION BY COUNTRY
8. IMPORTS
The Largest Importers on The Market and How They Succeed
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Exporters on The Market and How They Succeed
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
11. COUNTRY PROFILES
The Largest Markets And Their Profiles
This Chapter is Available Only for the Professional Edition PRO- Brunei Darussalam
- Cambodia
- Indonesia
- Malaysia
- Myanmar
- Philippines
- Singapore
- Thailand
- Timor-Leste
- Vietnam
- Lao People's Democratic Republic
-
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption, By Country, 2018–2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Destination, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Origin, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Consumption, By Country, 2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Production, By Country, 2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, 2012–2023
Recommended reports
This report provides an in-depth analysis of the polycarbonate market in Asia.
This report provides an in-depth analysis of the polycarbonate market in the U.S..
This report provides an in-depth analysis of the polycarbonate market in China.
This report provides an in-depth analysis of the polycarbonate market in the EU.
This report provides an in-depth analysis of the global polycarbonate market.
- Polycarbonate Market
- Polyethylene With A Specific Gravity of Less Than Market
- Polyethylene in Primary Forms Market
- Plastics in Primary Forms Market
- Polystyrene Market
- Styrene-Acrylonitrile Market
- Acrylic Polymer Market
- Polyamide Market
- Polyethylene Terephthalate and Other Polyethylene Terephthalate in Primary Forms Market
- Natural Polymers Market