South-Eastern Asia: Market for Machinery For Sorting, Mixing, Agglomerating, Shaping Or Moulding of Mined Solids 2024

Market Size for Machinery For Sorting, Mixing, Agglomerating, Shaping Or Moulding of Mined Solids in South-Eastern Asia

The Southeast Asian market for machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids soared to $X in 2022, jumping by X% against the previous year. In general, consumption showed slight growth. As a result, consumption reached the peak level of $X. From 2018 to 2022, the growth of the market failed to regain momentum.

Production of Machinery For Sorting, Mixing, Agglomerating, Shaping Or Moulding of Mined Solids in South-Eastern Asia

In value terms, production of machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids expanded significantly to $X in 2022 estimated in export price. In general, production, however, continues to indicate a abrupt decrease. The pace of growth was the most pronounced in 2019 when the production volume increased by X% against the previous year. Over the period under review, production of reached the peak level at $X in 2012; however, from 2013 to 2022, production failed to regain momentum.

Exports of Machinery For Sorting, Mixing, Agglomerating, Shaping Or Moulding of Mined Solids

Exports in South-Eastern Asia

After two years of growth, shipments abroad of machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids decreased by X% to X units in 2022. Over the period under review, exports faced a drastic downturn. The growth pace was the most rapid in 2021 when exports increased by X%. The volume of export peaked at X units in 2012; however, from 2013 to 2022, the exports stood at a somewhat lower figure.

In value terms, exports of machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids contracted to $X in 2022. In general, exports continue to indicate a abrupt contraction. The pace of growth appeared the most rapid in 2018 when exports increased by X%. The level of export peaked at $X in 2013; however, from 2014 to 2022, the exports remained at a lower figure.

Exports by Country

Singapore was the key exporting country with an export of around X units, which amounted to X% of total exports. Thailand (X units) held the second position in the ranking, followed by Malaysia (X units), Vietnam (X units) and Lao People's Democratic Republic (X units). All these countries together held near X% share of total exports. The following exporters - the Philippines (X units) and Indonesia (X units) - together made up X% of total exports.

From 2012 to 2022, average annual rates of growth with regard to machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids exports from Singapore stood at X%. At the same time, Lao People's Democratic Republic (X%) and the Philippines (X%) displayed positive paces of growth. Moreover, Lao People's Democratic Republic emerged as the fastest-growing exporter exported in South-Eastern Asia, with a CAGR of X% from 2012-2022. By contrast, Vietnam (X%), Indonesia (X%), Thailand (X%) and Malaysia (X%) illustrated a downward trend over the same period. Lao People's Democratic Republic (X p.p.), Vietnam (X p.p.), the Philippines (X p.p.) and Thailand (X p.p.) significantly strengthened its position in terms of the total exports, while Singapore saw its share reduced by X% from 2012 to 2022, respectively. The shares of the other countries remained relatively stable throughout the analyzed period.

In value terms, the largest machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids supplying countries in South-Eastern Asia were Malaysia ($X), Singapore ($X) and Thailand ($X), with a combined X% share of total exports. Vietnam, Indonesia, Lao People's Democratic Republic and the Philippines lagged somewhat behind, together comprising a further X%.

Lao People's Democratic Republic, with a CAGR of X%, recorded the highest growth rate of the value of exports, among the main exporting countries over the period under review, while shipments for the other leaders experienced mixed trends in the exports figures.

Export Prices by Country

The export price in South-Eastern Asia stood at $X per unit in 2022, with an increase of X% against the previous year. Export price indicated a tangible expansion from 2012 to 2022: its price increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, export price for machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids decreased by X% against 2019 indices. The growth pace was the most rapid in 2018 when the export price increased by X% against the previous year. The level of export peaked at $X per unit in 2019; however, from 2020 to 2022, the export prices failed to regain momentum.

Prices varied noticeably by country of origin: amid the top suppliers, the country with the highest price was Malaysia ($X per unit), while Lao People's Democratic Republic ($X per unit) was amongst the lowest.

From 2012 to 2022, the most notable rate of growth in terms of prices was attained by Thailand (X%), while the other leaders experienced more modest paces of growth.

Imports of Machinery For Sorting, Mixing, Agglomerating, Shaping Or Moulding of Mined Solids

Imports in South-Eastern Asia

In 2022, purchases abroad of machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids increased by X% to X units, rising for the second consecutive year after three years of decline. In general, imports showed a relatively flat trend pattern. The growth pace was the most rapid in 2017 when imports increased by X%. As a result, imports attained the peak of X units. From 2018 to 2022, the growth of imports of failed to regain momentum.

In value terms, imports of machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids soared to $X in 2022. Total imports indicated mild growth from 2012 to 2022: its value increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, imports increased by X% against 2020 indices. The level of import peaked at $X in 2014; however, from 2015 to 2022, imports failed to regain momentum.

Imports by Country

Indonesia was the key importer of machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids in South-Eastern Asia, with the volume of imports amounting to X units, which was approx. X% of total imports in 2022. The Philippines (X units) took an X% share (based on physical terms) of total imports, which put it in second place, followed by Malaysia (X%), Singapore (X%), Thailand (X%) and Vietnam (X%). Lao People's Democratic Republic (X units) followed a long way behind the leaders.

From 2012 to 2022, the biggest increases were recorded for Lao People's Democratic Republic (with a CAGR of X%), while purchases for the other leaders experienced more modest paces of growth.

In value terms, Indonesia ($X) constitutes the largest market for imported machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids in South-Eastern Asia, comprising X% of total imports. The second position in the ranking was taken by Vietnam ($X), with a X% share of total imports. It was followed by Thailand, with an X% share.

In Indonesia, imports of machinery for sorting, mixing, agglomerating, shaping or moulding of mined solids expanded at an average annual rate of X% over the period from 2012-2022. The remaining importing countries recorded the following average annual rates of imports growth: Vietnam (X% per year) and Thailand (X% per year).

Import Prices by Country

The import price in South-Eastern Asia stood at $X per unit in 2022, picking up by X% against the previous year. Overall, the import price showed a relatively flat trend pattern. The level of import peaked at $X per unit in 2014; however, from 2015 to 2022, import prices failed to regain momentum.

Prices varied noticeably by country of destination: amid the top importers, the country with the highest price was Indonesia ($X per unit), while the Philippines ($X per unit) was amongst the lowest.

From 2012 to 2022, the most notable rate of growth in terms of prices was attained by Indonesia (X%), while the other leaders experienced a decline in the import price figures.

Source: IndexBox Platform

Frequently Asked Questions (FAQ) :