New Zealand - Nails, Tacks, Staples, Screws and Bolts - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingNew Zealand: Nail And Bolt Market 2024
Nail And Bolt Market Size in New Zealand
The New Zealand nail and bolt market rose modestly to $X in 2022, growing by X% against the previous year. This figure reflects the total revenues of producers and importers (excluding logistics costs, retail marketing costs, and retailers' margins, which will be included in the final consumer price). Over the period under review, consumption, however, saw prominent growth. Over the period under review, the market attained the maximum level in 2022 and is likely to continue growth in the immediate term.
Nail And Bolt Exports
Exports from New Zealand
After two years of decline, shipments abroad of nails, tacks, staples, screws and bolts increased by X% to X tons in 2022. Overall, exports, however, continue to indicate a abrupt contraction. The pace of growth appeared the most rapid in 2014 when exports increased by X% against the previous year. As a result, the exports attained the peak of X tons. From 2015 to 2022, the growth of the exports remained at a somewhat lower figure.
In value terms, nail and bolt exports amounted to $X in 2022. In general, exports, however, showed a mild reduction. The most prominent rate of growth was recorded in 2013 when exports increased by X% against the previous year. The exports peaked at $X in 2014; however, from 2015 to 2022, the exports failed to regain momentum.
Exports by Country
Australia (X tons) was the main destination for nail and bolt exports from New Zealand, accounting for a X% share of total exports. Moreover, nail and bolt exports to Australia exceeded the volume sent to the second major destination, the United States (X tons), threefold. The third position in this ranking was held by Maldives (X tons), with a X% share.
From 2012 to 2022, the average annual growth rate of volume to Australia totaled X%. Exports to the other major destinations recorded the following average annual rates of exports growth: the United States (X% per year) and Maldives (X% per year).
In value terms, the largest markets for nail and bolt exported from New Zealand were Australia ($X), the United States ($X) and Fiji ($X), together accounting for X% of total exports. Maldives, Cook Islands, Thailand, French Polynesia, Tonga, New Caledonia, Papua New Guinea, Samoa, Nigeria and Bahrain lagged somewhat behind, together accounting for a further X%.
Thailand, with a CAGR of X%, recorded the highest rates of growth with regard to the value of exports, among the main countries of destination over the period under review, while shipments for the other leaders experienced more modest paces of growth.
Export Prices by Country
The average nail and bolt export price stood at $X per ton in 2022, therefore, remained relatively stable against the previous year. Overall, the export price, however, enjoyed a remarkable increase. The growth pace was the most rapid in 2018 an increase of X% against the previous year. The export price peaked at $X per ton in 2021, and then contracted slightly in the following year.
There were significant differences in the average prices for the major export markets. In 2022, amid the top suppliers, the country with the highest price was Bahrain ($X per ton), while the average price for exports to Tonga ($X per ton) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was recorded for supplies to Bahrain (X%), while the prices for the other major destinations experienced more modest paces of growth.
Nail And Bolt Imports
Imports into New Zealand
In 2022, nail and bolt imports into New Zealand reduced to X tons, dropping by X% compared with 2021. The total import volume increased at an average annual rate of X% over the period from 2012 to 2022; however, the trend pattern indicated some noticeable fluctuations being recorded in certain years. The pace of growth appeared the most rapid in 2021 when imports increased by X%. As a result, imports attained the peak of X tons, and then shrank in the following year.
In value terms, nail and bolt imports rose to $X in 2022. In general, total imports indicated a resilient expansion from 2012 to 2022: its value increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, imports increased by X% against 2020 indices. The pace of growth was the most pronounced in 2021 when imports increased by X% against the previous year. Imports peaked in 2022 and are expected to retain growth in the immediate term.
Imports by Country
In 2022, China (X tons) constituted the largest nail and bolt supplier to New Zealand, with a X% share of total imports. Moreover, nail and bolt imports from China exceeded the figures recorded by the second-largest supplier, Taiwan (Chinese) (X tons), fourfold. The third position in this ranking was taken by Australia (X tons), with a X% share.
From 2012 to 2022, the average annual rate of growth in terms of volume from China amounted to X%. The remaining supplying countries recorded the following average annual rates of imports growth: Taiwan (Chinese) (X% per year) and Australia (X% per year).
In value terms, the largest nail and bolt suppliers to New Zealand were China ($X), Taiwan (Chinese) ($X) and Australia ($X), together accounting for X% of total imports. The United States and Malaysia lagged somewhat behind, together comprising a further X%.
In terms of the main suppliers, Malaysia, with a CAGR of X%, recorded the highest rates of growth with regard to the value of imports, over the period under review, while purchases for the other leaders experienced more modest paces of growth.
Import Prices by Country
The average nail and bolt import price stood at $X per ton in 2022, with an increase of X% against the previous year. Over the period from 2012 to 2022, it increased at an average annual rate of X%. As a result, import price reached the peak level and is likely to continue growth in the immediate term.
There were significant differences in the average prices amongst the major supplying countries. In 2022, amid the top importers, the country with the highest price was the United States ($X per ton), while the price for Malaysia ($X per ton) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was attained by the United States (X%), while the prices for the other major suppliers experienced more modest paces of growth.
Source: IndexBox Platform
Frequently Asked Questions (FAQ) :
This report provides an in-depth analysis of the nail and bolt market in New Zealand. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 25931410 -
- Prodcom 25931480 -
- Prodcom 25941113 - Screws, turned from bars, rods, profiles, or wire, of a shank thickness . 6 mm
- Prodcom 25941115 - Other screws and bolts for fixing railway truck construction material, iron or steel
- Prodcom 25941117 - Screws and bolts without heads in steel
- Prodcom 25941123 - Slotted and cross-recessed screws of stainless steel
- Prodcom 25941125 - Other screws and bolts with heads
- Prodcom 25941127 - Hexagon socket head screws of stainless steel
- Prodcom 25941129 - Other hexagon socket head screws
- Prodcom 25941131 - Stainless steel hexagon bolts with heads
- Prodcom 25941133 - Iron or steel hexagon bolts with heads, with a tensile strength < .800 MPa (excluding of stainless steel)
- Prodcom 25941135 - Iron or steel hexagon bolts with heads, with a tensile strength. .800 MPa (excluding of stainless steel)
- Prodcom 25941139 - Iron or steel bolts with heads (excluding hexagon bolts)
- Prodcom 25941153 - Iron or steel wood screws
- Prodcom 25941157 - Iron or steel screw hooks and screw rings
- Prodcom 25941173 - Stainless steel self-tapping screws (excluding threaded mechanisms used to transmit motion, or to act as an active machinery part)
- Prodcom 25941175 - Iron or steel self-tapping screws (excluding of stainless steel, t hreaded mechanisms used to transmit motion, or to act as an active machinery part)
- Prodcom 25941183 - Iron or steel nuts turned from bars, rods, profiles, or wire, of solid section, of a hole diameter . 6 mm
- Prodcom 25941185 - Stainless steel nuts (excluding those turned from bars, rods, p rofiles, or wire, of solid section, of a hole diameter . 6 mm)
- Prodcom 25941187 - Iron or steel nuts (including self-locking nuts) (excluding of stainless steel, turned from bars, rods, profiles, or wire, of solid section, of a hole diameter . 6 mm)
- Prodcom 25941190 - Threaded articles, n.e.c., of iron or steel
- Prodcom 25941210 - Iron or steel spring washers and other lock washers
- Prodcom 25941230 - Iron or steel washers (excluding spring washers and other lock washers)
- Prodcom 25941250 - Iron or steel rivets (including partly hollow rivets) (excluding tubular or bifurcated rivets for all purposes)
- Prodcom 25941270 - Iron or steel cotters and cotter-pins and similar non-threaded articles (excluding washers, rivets)
- Prodcom 25941310 - Washers, rivets, cotters, cotter pins and the like, not threaded, of copper
- Prodcom 25941340 - Copper screws, bolts and nuts (excluding pointed screw nails, s crew stoppers, threaded mechanisms used to transmit motion/to act as active machinery part, screw hooks, rings)
- Prodcom 25941370 - Threaded articles of copper, n.e.c.
Country coverage:
- New Zealand
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Trade (exports and imports) in New Zealand
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- MARKET STRUCTURE
- TRADE BALANCE
- PER CAPITA CONSUMPTION
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
8. IMPORTS
The Largest Import Supplying Countries
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Destinations for Exports
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption In 2012-2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Origin, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Destination, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Market Structure – Domestic Supply vs. Imports, In Physical Terms, 2012-2023
- Market Structure – Domestic Supply vs. Imports, In Value Terms, 2012-2023
- Trade Balance, In Physical Terms, 2012-2023
- Trade Balance, In Value Terms, 2012-2023
- Per Capita Consumption, 2012-2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Origin, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Destination, 2012–2023
Recommended reports
This report provides an in-depth analysis of the nail and bolt market in Asia.
This report provides an in-depth analysis of the nail and bolt market in the U.S..
This report provides an in-depth analysis of the nail and bolt market in China.
This report provides an in-depth analysis of the nail and bolt market in the EU.
This report provides an in-depth analysis of the global nail and bolt market.