EU - Injection-Moulding Machines for Working Rubber or Plastics - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingEU: Injection-Moulding Machine Market 2024
Injection-Moulding Machine Market Size in the EU
In 2022, the EU injection-moulding machine market decreased by X% to $X, falling for the second consecutive year after four years of growth. In general, consumption, however, saw a measured increase. Over the period under review, the market attained the peak level at $X in 2020; however, from 2021 to 2022, consumption stood at a somewhat lower figure.
Injection-Moulding Machine Production in the EU
In value terms, injection-moulding machine production expanded remarkably to $X in 2022 estimated in export price. The total output value increased at an average annual rate of X% from 2012 to 2022; however, the trend pattern remained consistent, with only minor fluctuations being observed in certain years. The most prominent rate of growth was recorded in 2021 with an increase of X% against the previous year. Over the period under review, production attained the maximum level in 2022 and is likely to see steady growth in the near future.
Injection-Moulding Machine Exports
Exports in the EU
In 2022, overseas shipments of injection-moulding machines for working rubber or plastics decreased by X% to X units for the first time since 2018, thus ending a three-year rising trend. In general, exports showed a deep contraction. The growth pace was the most rapid in 2015 when exports increased by X% against the previous year. The volume of export peaked at X units in 2016; however, from 2017 to 2022, the exports stood at a somewhat lower figure.
In value terms, injection-moulding machine exports fell to $X in 2022. Overall, exports saw a perceptible reduction. The pace of growth was the most pronounced in 2021 when exports increased by X% against the previous year. The level of export peaked at $X in 2017; however, from 2018 to 2022, the exports stood at a somewhat lower figure.
Exports by Country
Germany was the main exporting country with an export of around X units, which accounted for X% of total exports. Italy (X units) ranks second in terms of the total exports with a X% share, followed by the Netherlands (X%). Luxembourg (X units), the Czech Republic (X units), France (X units), Slovakia (X units), Belgium (X units), Poland (X units), Hungary (X units) and Spain (X units) took a relatively small share of total exports.
From 2012 to 2022, average annual rates of growth with regard to injection-moulding machine exports from Germany stood at X%. At the same time, Luxembourg (X%), Hungary (X%), Slovakia (X%), Poland (X%), the Czech Republic (X%), Belgium (X%) and the Netherlands (X%) displayed positive paces of growth. Moreover, Luxembourg emerged as the fastest-growing exporter exported in the European Union, with a CAGR of X% from 2012-2022. Spain and Italy experienced a relatively flat trend pattern. By contrast, France (X%) illustrated a downward trend over the same period. Germany (X p.p.), Italy (X p.p.), the Netherlands (X p.p.), Luxembourg (X p.p.), the Czech Republic (X p.p.), Slovakia (X p.p.), Poland (X p.p.), Belgium (X p.p.) and Hungary (X p.p.) significantly strengthened its position in terms of the total exports, while the shares of the other countries remained relatively stable throughout the analyzed period.
In value terms, Germany ($X) remains the largest injection-moulding machine supplier in the European Union, comprising X% of total exports. The second position in the ranking was taken by Italy ($X), with a X% share of total exports. It was followed by Luxembourg, with a X% share.
In Germany, injection-moulding machine exports remained relatively stable over the period from 2012-2022. The remaining exporting countries recorded the following average annual rates of exports growth: Italy (X% per year) and Luxembourg (X% per year).
Export Prices by Country
In 2022, the export price in the European Union amounted to $X per unit, with an increase of X% against the previous year. Overall, the export price posted a prominent expansion. The most prominent rate of growth was recorded in 2018 an increase of X% against the previous year. Over the period under review, the export prices attained the peak figure at $X per unit in 2014; however, from 2015 to 2022, the export prices stood at a somewhat lower figure.
There were significant differences in the average prices amongst the major exporting countries. In 2022, amid the top suppliers, the country with the highest price was Germany ($X per unit), while the Netherlands ($X per unit) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was attained by Italy (X%), while the other leaders experienced more modest paces of growth.
Injection-Moulding Machine Imports
Imports in the EU
In 2022, approx. X units of injection-moulding machines for working rubber or plastics were imported in the European Union; falling by X% compared with the previous year. The total import volume increased at an average annual rate of X% over the period from 2012 to 2022; however, the trend pattern indicated some noticeable fluctuations being recorded throughout the analyzed period. The most prominent rate of growth was recorded in 2014 with an increase of X%. Over the period under review, imports hit record highs at X units in 2018; however, from 2019 to 2022, imports failed to regain momentum.
In value terms, injection-moulding machine imports declined modestly to $X in 2022. The total import value increased at an average annual rate of X% from 2012 to 2022; however, the trend pattern indicated some noticeable fluctuations being recorded throughout the analyzed period. The pace of growth appeared the most rapid in 2014 when imports increased by X% against the previous year. The level of import peaked at $X in 2018; however, from 2019 to 2022, imports remained at a lower figure.
Imports by Country
In 2022, Germany (X units) and Italy (X units) were the key importers of injection-moulding machines for working rubber or plastics in the European Union, together recording near X% of total imports. Poland (X units) ranks next in terms of the total imports with a X% share, followed by France (X%), Spain (X%) and the Czech Republic (X%). Belgium (X units), the Netherlands (X units), Romania (X units), Hungary (X units), Portugal (X units), Luxembourg (X units) and Slovenia (X units) followed a long way behind the leaders.
From 2012 to 2022, the most notable rate of growth in terms of purchases, amongst the leading importing countries, was attained by Luxembourg (with a CAGR of X%), while imports for the other leaders experienced more modest paces of growth.
In value terms, the largest injection-moulding machine importing markets in the European Union were Germany ($X), Italy ($X) and Poland ($X), together accounting for X% of total imports. France, the Czech Republic, Spain, Romania, the Netherlands, Hungary, Belgium, Luxembourg, Slovenia and Portugal lagged somewhat behind, together accounting for a further X%.
Luxembourg, with a CAGR of X%, recorded the highest rates of growth with regard to the value of imports, among the main importing countries over the period under review, while purchases for the other leaders experienced more modest paces of growth.
Import Prices by Country
The import price in the European Union stood at $X per unit in 2022, reducing by X% against the previous year. Over the last decade, it increased at an average annual rate of X%. The most prominent rate of growth was recorded in 2017 when the import price increased by X%. The level of import peaked at $X per unit in 2018; however, from 2019 to 2022, import prices failed to regain momentum.
Prices varied noticeably by country of destination: amid the top importers, the country with the highest price was Romania ($X per unit), while Belgium ($X per unit) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was attained by the Netherlands (X%), while the other leaders experienced more modest paces of growth.
Source: IndexBox Platform
Frequently Asked Questions (FAQ) :
This report provides an in-depth analysis of the injection-moulding machine market in the EU. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 28961010 - Injection-moulding machines for working rubber or plastics or for manufacturing rubber or plastic products
Country coverage:
- Austria
- Belgium
- Bulgaria
- Croatia
- Cyprus
- Czech Republic
- Denmark
- Estonia
- Finland
- France
- Germany
- Greece
- Hungary
- Ireland
- Italy
- Latvia
- Lithuania
- Luxembourg
- Malta
- Netherlands
- Poland
- Portugal
- Romania
- Slovakia
- Slovenia
- Spain
- Sweden
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Production in the EU, split by region and country
- Trade (exports and imports) in the EU
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- CONSUMPTION BY COUNTRY
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
- PRODUCTION BY COUNTRY
8. IMPORTS
The Largest Importers on The Market and How They Succeed
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Exporters on The Market and How They Succeed
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
11. COUNTRY PROFILES
The Largest Markets And Their Profiles
This Chapter is Available Only for the Professional Edition PRO- Austria
- Belgium
- Bulgaria
- Croatia
- Cyprus
- Czech Republic
- Denmark
- Estonia
- Finland
- France
- Germany
- Greece
- Hungary
- Ireland
- Italy
- Latvia
- Lithuania
- Luxembourg
- Malta
- Netherlands
- Poland
- Portugal
- Romania
- Slovakia
- Slovenia
- Spain
- Sweden
-
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption, By Country, 2018–2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Destination, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Origin, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Consumption, By Country, 2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Production, By Country, 2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, 2012–2023
Recommended reports
This report provides an in-depth analysis of the injection-moulding machine market in Asia.
This report provides an in-depth analysis of the injection-moulding machine market in the U.S..
This report provides an in-depth analysis of the injection-moulding machine market in China.
This report provides an in-depth analysis of the global injection-moulding machine market.