Central Asia - Lathes for Removing Metal - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingCentral Asia: Market for Lathes For Removing Metal 2024
Market Size for Lathes For Removing Metal in Central Asia
The Central Asian lathe for removing metal market surged to $X in 2023, increasing by X% against the previous year. The market value increased at an average annual rate of X% over the period from 2012 to 2023; however, the trend pattern indicated some noticeable fluctuations being recorded throughout the analyzed period. As a result, consumption reached the peak level and is likely to continue growth in the immediate term.
Production of Lathes For Removing Metal in Central Asia
In value terms, lathe for removing metal production fell to $X in 2023 estimated in export price. In general, production continues to indicate a perceptible slump. The growth pace was the most rapid in 2014 when the production volume increased by X% against the previous year. Over the period under review, lafor removing metal production attained the peak level at $X in 2018; however, from 2019 to 2023, production remained at a lower figure.
Exports of Lathes For Removing Metal
Exports in Central Asia
In 2023, after four years of growth, there was significant decline in overseas shipments of lathes for removing metal, when their volume decreased by X% to X units. In general, exports, however, showed a relatively flat trend pattern. The growth pace was the most rapid in 2014 with an increase of X% against the previous year. As a result, the exports reached the peak of X units. From 2015 to 2023, the growth of the exports failed to regain momentum.
In value terms, lathe for removing metal exports soared to $X in 2023. Overall, exports, however, showed significant growth. The pace of growth was the most pronounced in 2019 when exports increased by X%. The level of export peaked at $X in 2021; however, from 2022 to 2023, the exports stood at a somewhat lower figure.
Exports by Country
Tajikistan (X units) and Kazakhstan (X units) were the main exporters of lathes for removing metal in 2023, amounting to approx. X% and X% of total exports, respectively. It was distantly followed by Uzbekistan (X units), achieving a X% share of total exports. Kyrgyzstan (X units) and Turkmenistan (X units) followed a long way behind the leaders.
From 2012 to 2023, the biggest increases were recorded for Uzbekistan (with a CAGR of X%), while shipments for the other leaders experienced more modest paces of growth.
In value terms, Kazakhstan ($X) remains the largest lathe for removing metal supplier in Central Asia, comprising X% of total exports. The second position in the ranking was taken by Tajikistan ($X), with a X% share of total exports. It was followed by Uzbekistan, with a X% share.
From 2012 to 2023, the average annual growth rate of value in Kazakhstan totaled X%. The remaining exporting countries recorded the following average annual rates of exports growth: Tajikistan (X% per year) and Uzbekistan (X% per year).
Export Prices by Country
In 2023, the export price in Central Asia amounted to $X per unit, increasing by X% against the previous year. In general, the export price showed significant growth. The pace of growth was the most pronounced in 2015 when the export price increased by X%. Over the period under review, the export prices hit record highs at $X per unit in 2021; however, from 2022 to 2023, the export prices stood at a somewhat lower figure.
There were significant differences in the average prices amongst the major exporting countries. In 2023, amid the top suppliers, the country with the highest price was Kazakhstan ($X per unit), while Tajikistan ($X per unit) was amongst the lowest.
From 2012 to 2023, the most notable rate of growth in terms of prices was attained by Turkmenistan (X%), while the other leaders experienced more modest paces of growth.
Imports of Lathes For Removing Metal
Imports in Central Asia
In 2023, approx. X units of lathes for removing metal were imported in Central Asia; jumping by X% on 2022. Over the period under review, imports saw buoyant growth. As a result, imports attained the peak and are likely to continue growth in the immediate term.
In value terms, lathe for removing metal imports surged to $X in 2023. Total imports indicated buoyant growth from 2012 to 2023: its value increased at an average annual rate of X% over the last eleven-year period. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2023 figures, imports increased by X% against 2018 indices. As a result, imports attained the peak and are likely to continue growth in the immediate term.
Imports by Country
Uzbekistan represented the key importer of lathes for removing metal in Central Asia, with the volume of imports recording X units, which was near X% of total imports in 2023. It was distantly followed by Turkmenistan (X units), Kazakhstan (X units) and Kyrgyzstan (X units), together generating a X% share of total imports. Mongolia (X units) took a little share of total imports.
Uzbekistan was also the fastest-growing in terms of the lathes for removing metal imports, with a CAGR of X% from 2012 to 2023. At the same time, Turkmenistan (X%), Kyrgyzstan (X%) and Mongolia (X%) displayed positive paces of growth. By contrast, Kazakhstan (X%) illustrated a downward trend over the same period. Uzbekistan (X p.p.) and Turkmenistan (X p.p.) significantly strengthened its position in terms of the total imports, while Mongolia and Kazakhstan saw its share reduced by X% and X% from 2012 to 2023, respectively. The shares of the other countries remained relatively stable throughout the analyzed period.
In value terms, Uzbekistan ($X) constitutes the largest market for imported lathes for removing metal in Central Asia, comprising X% of total imports. The second position in the ranking was held by Kazakhstan ($X), with a X% share of total imports. It was followed by Turkmenistan, with a X% share.
From 2012 to 2023, the average annual rate of growth in terms of value in Uzbekistan totaled X%. The remaining importing countries recorded the following average annual rates of imports growth: Kazakhstan (X% per year) and Turkmenistan (X% per year).
Import Prices by Country
The import price in Central Asia stood at $X per unit in 2023, declining by X% against the previous year. Overall, the import price continues to indicate a mild decrease. The most prominent rate of growth was recorded in 2018 an increase of X%. As a result, import price attained the peak level of $X per unit. From 2019 to 2023, the import prices remained at a somewhat lower figure.
There were significant differences in the average prices amongst the major importing countries. In 2023, amid the top importers, the country with the highest price was Kazakhstan ($X per unit), while Kyrgyzstan ($X per unit) was amongst the lowest.
From 2012 to 2023, the most notable rate of growth in terms of prices was attained by Kyrgyzstan (X%), while the other leaders experienced mixed trends in the import price figures.
Source: IndexBox Platform
This report provides an in-depth analysis of the market for lathe for removing metal in Central Asia. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 28412123 - Numerically controlled horizontal lathes, turning centres, for removing metal
- Prodcom 28412127 - Numerically controlled horizontal lathes, automatic lathes, for removing metal (excluding turning centres)
- Prodcom 28412129 - Numerically controlled horizontal lathes, for removing metal (excluding turning centres, automatic lathes)
- Prodcom 28412140 - Non-numerically controlled horizontal lathes, for removing metal
- Prodcom 28412160 - Lathes, including turning centres, for removing metal (excluding horizontal lathes)
Country coverage:
- Kazakhstan
- Kyrgyzstan
- Mongolia
- Tajikistan
- Turkmenistan
- Uzbekistan
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Production in Central Asia, split by region and country
- Trade (exports and imports) in Central Asia
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- CONSUMPTION BY COUNTRY
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
- PRODUCTION BY COUNTRY
8. IMPORTS
The Largest Importers on The Market and How They Succeed
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Exporters on The Market and How They Succeed
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
11. COUNTRY PROFILES
The Largest Markets And Their Profiles
This Chapter is Available Only for the Professional Edition PRO- Kazakhstan
- Kyrgyzstan
- Mongolia
- Tajikistan
- Turkmenistan
- Uzbekistan
-
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption, By Country, 2018–2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Destination, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Origin, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Consumption, By Country, 2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Production, By Country, 2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, 2012–2023
Recommended reports
This report provides an in-depth analysis of the market for lathe for removing metal in Asia.
This report provides an in-depth analysis of the market for lathe for removing metal in the U.S..
This report provides an in-depth analysis of the market for lathe for removing metal in China.
This report provides an in-depth analysis of the market for lathe for removing metal in the EU.
This report provides an in-depth analysis of the global market for lathe for removing metal.
- Lathe for Removing Metal Market
- Machine-Tool for Removing Material Market
- Horizontal Machining Centre Market
- Unit Construction Machine Market
- Multi-Station Transfer Machine Market
- Non-Numerically Controlled Lathe Market
- Way-Type Unit Head Market
- Numerically Controlled Drilling Machine Market
- Non-Numerically Controlled Drilling Machine Market
- Numerically Controlled Knee-Type Milling Machine Market