ASEAN - Lathes for Removing Metal - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingASEAN: Market for Lathes For Removing Metal 2024
Market Size for Lathes For Removing Metal in ASEAN
The ASEAN lathe for removing metal market reduced notably to $X in 2023, with a decrease of X% against the previous year. Overall, consumption showed a abrupt shrinkage. Over the period under review, the market attained the peak level at $X in 2012; however, from 2013 to 2023, consumption failed to regain momentum.
Production of Lathes For Removing Metal in ASEAN
In value terms, lathe for removing metal production fell significantly to $X in 2023 estimated in export price. Over the period under review, production, however, posted a mild increase. The pace of growth appeared the most rapid in 2015 with an increase of X% against the previous year. Over the period under review, lafor removing metal production attained the maximum level at $X in 2018; however, from 2019 to 2023, production failed to regain momentum.
Exports of Lathes For Removing Metal
Exports in ASEAN
After two years of growth, overseas shipments of lathes for removing metal decreased by X% to X units in 2023. Over the period under review, exports, however, showed prominent growth. The most prominent rate of growth was recorded in 2021 when exports increased by X%. The volume of export peaked at X units in 2022, and then contracted in the following year.
In value terms, lathe for removing metal exports reached $X in 2023. Overall, exports, however, posted a noticeable expansion. The most prominent rate of growth was recorded in 2021 when exports increased by X% against the previous year. Over the period under review, the lafor removing metal exports reached the peak figure in 2023 and are likely to see steady growth in years to come.
Exports by Country
Singapore was the major exporter of lathes for removing metal in ASEAN, with the volume of exports amounting to X units, which was near X% of total exports in 2023. It was distantly followed by Thailand (X units) and the Philippines (X units), together creating a X% share of total exports. Malaysia (X units) held a relatively small share of total exports.
From 2012 to 2023, the biggest increases were recorded for Thailand (with a CAGR of X%), while shipments for the other leaders experienced more modest paces of growth.
In value terms, Thailand ($X) remains the largest lathe for removing metal supplier in ASEAN, comprising X% of total exports. The second position in the ranking was taken by Singapore ($X), with an X% share of total exports. It was followed by the Philippines, with an X% share.
In Thailand, lathe for removing metal exports expanded at an average annual rate of X% over the period from 2012-2023. In the other countries, the average annual rates were as follows: Singapore (X% per year) and the Philippines (X% per year).
Export Prices by Country
In 2023, the export price in ASEAN amounted to $X per unit, with an increase of X% against the previous year. Over the period under review, the export price, however, continues to indicate a relatively flat trend pattern. The most prominent rate of growth was recorded in 2021 an increase of X%. Over the period under review, the export prices attained the peak figure at $X per unit in 2018; however, from 2019 to 2023, the export prices failed to regain momentum.
Prices varied noticeably by country of origin: amid the top suppliers, the country with the highest price was Thailand ($X per unit), while Singapore ($X per unit) was amongst the lowest.
From 2012 to 2023, the most notable rate of growth in terms of prices was attained by the Philippines (X%), while the other leaders experienced a decline in the export price figures.
Imports of Lathes For Removing Metal
Imports in ASEAN
In 2023, lathe for removing metal imports in ASEAN expanded sharply to X units, growing by X% against the year before. In general, imports, however, showed a mild setback. The growth pace was the most rapid in 2021 when imports increased by X%. The volume of import peaked at X units in 2012; however, from 2013 to 2023, imports failed to regain momentum.
In value terms, lathe for removing metal imports reduced to $X in 2023. Overall, imports, however, recorded a abrupt slump. The pace of growth was the most pronounced in 2021 with an increase of X%. The level of import peaked at $X in 2012; however, from 2013 to 2023, imports stood at a somewhat lower figure.
Imports by Country
The purchases of the three major importers of lathes for removing metal, namely Thailand, the Philippines and Malaysia, represented more than two-thirds of total import. It was distantly followed by Vietnam (X units) and Singapore (X units), together making up a X% share of total imports. Indonesia (X units) followed a long way behind the leaders.
From 2012 to 2023, the biggest increases were recorded for the Philippines (with a CAGR of X%), while purchases for the other leaders experienced more modest paces of growth.
In value terms, the largest lathe for removing metal importing markets in ASEAN were Thailand ($X), Vietnam ($X) and Indonesia ($X), together comprising X% of total imports.
Among the main importing countries, Vietnam, with a CAGR of X%, recorded the highest growth rate of the value of imports, over the period under review, while purchases for the other leaders experienced mixed trends in the imports figures.
Import Prices by Country
In 2023, the import price in ASEAN amounted to $X per unit, which is down by X% against the previous year. Over the period under review, the import price continues to indicate a deep reduction. The most prominent rate of growth was recorded in 2013 when the import price increased by X%. The level of import peaked at $X per unit in 2014; however, from 2015 to 2023, import prices stood at a somewhat lower figure.
There were significant differences in the average prices amongst the major importing countries. In 2023, amid the top importers, the country with the highest price was Vietnam ($X per unit), while the Philippines ($X per unit) was amongst the lowest.
From 2012 to 2023, the most notable rate of growth in terms of prices was attained by Indonesia (X%), while the other leaders experienced a decline in the import price figures.
Source: IndexBox Platform
This report provides an in-depth analysis of the market for lathe for removing metal in ASEAN. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 28412123 - Numerically controlled horizontal lathes, turning centres, for removing metal
- Prodcom 28412127 - Numerically controlled horizontal lathes, automatic lathes, for removing metal (excluding turning centres)
- Prodcom 28412129 - Numerically controlled horizontal lathes, for removing metal (excluding turning centres, automatic lathes)
- Prodcom 28412140 - Non-numerically controlled horizontal lathes, for removing metal
- Prodcom 28412160 - Lathes, including turning centres, for removing metal (excluding horizontal lathes)
Country coverage:
- Brunei Darussalam
- Cambodia
- Indonesia
- Lao People's Democratic Republic
- Malaysia
- Myanmar
- Philippines
- Singapore
- Thailand
- Vietnam
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Production in ASEAN, split by region and country
- Trade (exports and imports) in ASEAN
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- CONSUMPTION BY COUNTRY
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
- PRODUCTION BY COUNTRY
8. IMPORTS
The Largest Importers on The Market and How They Succeed
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Exporters on The Market and How They Succeed
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
11. COUNTRY PROFILES
The Largest Markets And Their Profiles
This Chapter is Available Only for the Professional Edition PRO- Brunei Darussalam
- Cambodia
- Indonesia
- Malaysia
- Myanmar
- Philippines
- Singapore
- Thailand
- Vietnam
- Lao People's Democratic Republic
-
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption, By Country, 2018–2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Destination, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Origin, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Consumption, By Country, 2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Production, By Country, 2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, 2012–2023
Recommended reports
This report provides an in-depth analysis of the market for lathe for removing metal in Asia.
This report provides an in-depth analysis of the market for lathe for removing metal in the U.S..
This report provides an in-depth analysis of the market for lathe for removing metal in China.
This report provides an in-depth analysis of the market for lathe for removing metal in the EU.
This report provides an in-depth analysis of the global market for lathe for removing metal.
- Lathe for Removing Metal Market
- Machine-Tool for Removing Material Market
- Horizontal Machining Centre Market
- Unit Construction Machine Market
- Multi-Station Transfer Machine Market
- Non-Numerically Controlled Lathe Market
- Way-Type Unit Head Market
- Numerically Controlled Drilling Machine Market
- Non-Numerically Controlled Drilling Machine Market
- Numerically Controlled Knee-Type Milling Machine Market