ASEAN - Extruders for Working Rubber or Plastics - Market Analysis, Forecast, Size, Trends and Insights
Get instant access to more than 2 million reports, dashboards, and datasets on the IndexBox Platform.
View PricingASEAN: Plastic Extruder Market 2024
Plastic Extruder Market Size in ASEAN
The ASEAN plastic extruder market declined to $X in 2022, waning by X% against the previous year. In general, consumption recorded a relatively flat trend pattern. The level of consumption peaked at $X in 2019; however, from 2020 to 2022, consumption failed to regain momentum.
Plastic Extruder Production in ASEAN
In value terms, plastic extruder production contracted significantly to $X in 2022 estimated in export price. Over the period under review, production, however, continues to indicate a significant expansion. The pace of growth was the most pronounced in 2014 with an increase of X% against the previous year. Over the period under review, production attained the maximum level at $X in 2016; however, from 2017 to 2022, production stood at a somewhat lower figure.
Plastic Extruder Exports
Exports in ASEAN
In 2022, overseas shipments of extruders for working rubber or plastics increased by X% to X units, rising for the second year in a row after four years of decline. Over the period under review, exports showed a tangible expansion. The growth pace was the most rapid in 2014 with an increase of X% against the previous year. Over the period under review, the exports attained the peak figure at X units in 2016; however, from 2017 to 2022, the exports remained at a lower figure.
In value terms, plastic extruder exports surged to $X in 2022. Overall, exports, however, saw a slight shrinkage. Over the period under review, the exports attained the maximum at $X in 2012; however, from 2013 to 2022, the exports failed to regain momentum.
Exports by Country
Singapore was the largest exporter of extruders for working rubber or plastics in ASEAN, with the volume of exports amounting to X units, which was approx. X% of total exports in 2022. Thailand (X units) took a X% share (based on physical terms) of total exports, which put it in second place, followed by Malaysia (X%). Vietnam (X units) followed a long way behind the leaders.
Singapore was also the fastest-growing in terms of the extruders for working rubber or plastics exports, with a CAGR of X% from 2012 to 2022. At the same time, Vietnam (X%) displayed positive paces of growth. Thailand experienced a relatively flat trend pattern. By contrast, Malaysia (X%) illustrated a downward trend over the same period. Singapore (X p.p.) significantly strengthened its position in terms of the total exports, while Thailand and Malaysia saw its share reduced by X% and X% from 2012 to 2022, respectively. The shares of the other countries remained relatively stable throughout the analyzed period.
In value terms, Thailand ($X) remains the largest plastic extruder supplier in ASEAN, comprising X% of total exports. The second position in the ranking was held by Singapore ($X), with a X% share of total exports. It was followed by Malaysia, with a X% share.
In Thailand, plastic extruder exports remained relatively stable over the period from 2012-2022. In the other countries, the average annual rates were as follows: Singapore (X% per year) and Malaysia (X% per year).
Export Prices by Country
In 2022, the export price in ASEAN amounted to $X per unit, declining by X% against the previous year. Over the period under review, the export price saw a noticeable downturn. The most prominent rate of growth was recorded in 2017 when the export price increased by X% against the previous year. The level of export peaked at $X per unit in 2019; however, from 2020 to 2022, the export prices stood at a somewhat lower figure.
Prices varied noticeably by country of origin: amid the top suppliers, the country with the highest price was Vietnam ($X per unit), while Singapore ($X per unit) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was attained by Thailand (X%), while the other leaders experienced a decline in the export price figures.
Plastic Extruder Imports
Imports in ASEAN
Plastic extruder imports skyrocketed to X units in 2022, rising by X% against the previous year. Total imports indicated strong growth from 2012 to 2022: its volume increased at an average annual rate of X% over the last decade. The trend pattern, however, indicated some noticeable fluctuations being recorded throughout the analyzed period. Based on 2022 figures, imports increased by X% against 2020 indices. The most prominent rate of growth was recorded in 2021 when imports increased by X% against the previous year. Over the period under review, imports attained the maximum at X units in 2019; however, from 2020 to 2022, imports failed to regain momentum.
In value terms, plastic extruder imports dropped to $X in 2022. Overall, imports, however, recorded a slight setback. The pace of growth was the most pronounced in 2021 when imports increased by X% against the previous year. Over the period under review, imports attained the peak figure at $X in 2012; however, from 2013 to 2022, imports remained at a lower figure.
Imports by Country
In 2022, the Philippines (X units) represented the major importer of extruders for working rubber or plastics, constituting X% of total imports. It was distantly followed by Thailand (X units), Malaysia (X units), Vietnam (X units), Indonesia (X units) and Singapore (X units), together mixing up a X% share of total imports. Cambodia (X units) followed a long way behind the leaders.
From 2012 to 2022, average annual rates of growth with regard to plastic extruder imports into the Philippines stood at X%. At the same time, Cambodia (X%), Vietnam (X%), Malaysia (X%) and Singapore (X%) displayed positive paces of growth. Moreover, Cambodia emerged as the fastest-growing importer imported in ASEAN, with a CAGR of X% from 2012-2022. By contrast, Thailand (X%) and Indonesia (X%) illustrated a downward trend over the same period. While the share of the Philippines (X p.p.), Vietnam (X p.p.) and Malaysia (X p.p.) increased significantly in terms of the total imports from 2012-2022, the share of Indonesia (X p.p.) and Thailand (X p.p.) displayed negative dynamics. The shares of the other countries remained relatively stable throughout the analyzed period.
In value terms, Vietnam ($X), Thailand ($X) and Indonesia ($X) appeared to be the countries with the highest levels of imports in 2022, with a combined X% share of total imports. Malaysia, the Philippines, Cambodia and Singapore lagged somewhat behind, together comprising a further X%.
Among the main importing countries, Cambodia, with a CAGR of X%, saw the highest rates of growth with regard to the value of imports, over the period under review, while purchases for the other leaders experienced more modest paces of growth.
Import Prices by Country
In 2022, the import price in ASEAN amounted to $X per unit, which is down by X% against the previous year. Over the period under review, the import price continues to indicate a abrupt descent. The most prominent rate of growth was recorded in 2020 when the import price increased by X% against the previous year. The level of import peaked at $X per unit in 2012; however, from 2013 to 2022, import prices failed to regain momentum.
Prices varied noticeably by country of destination: amid the top importers, the country with the highest price was Vietnam ($X per unit), while the Philippines ($X per unit) was amongst the lowest.
From 2012 to 2022, the most notable rate of growth in terms of prices was attained by Cambodia (X%), while the other leaders experienced mixed trends in the import price figures.
Source: IndexBox Platform
Frequently Asked Questions (FAQ) :
This report provides an in-depth analysis of the plastic extruder market in ASEAN. Within it, you will discover the latest data on market trends and opportunities by country, consumption, production and price developments, as well as the global trade (imports and exports). The forecast exhibits the market prospects through 2030.
Product coverage:
- Prodcom 28961030 - Extruders for working rubber or plastics, or for manufacturing rubber or plastic products
Country coverage:
- Brunei Darussalam
- Cambodia
- Indonesia
- Lao People's Democratic Republic
- Malaysia
- Myanmar
- Philippines
- Singapore
- Thailand
- Vietnam
Data coverage:
- Market volume and value
- Per Capita consumption
- Forecast of the market dynamics in the medium term
- Production in ASEAN, split by region and country
- Trade (exports and imports) in ASEAN
- Export and import prices
- Market trends, drivers and restraints
- Key market players and their profiles
Reasons to buy this report:
- Take advantage of the latest data
- Find deeper insights into current market developments
- Discover vital success factors affecting the market
This report is designed for manufacturers, distributors, importers, and wholesalers, as well as for investors, consultants and advisors.
In this report, you can find information that helps you to make informed decisions on the following issues:
- How to diversify your business and benefit from new market opportunities
- How to load your idle production capacity
- How to boost your sales on overseas markets
- How to increase your profit margins
- How to make your supply chain more sustainable
- How to reduce your production and supply chain costs
- How to outsource production to other countries
- How to prepare your business for global expansion
While doing this research, we combine the accumulated expertise of our analysts and the capabilities of artificial intelligence. The AI-based platform, developed by our data scientists, constitutes the key working tool for business analysts, empowering them to discover deep insights and ideas from the marketing data.
-
1. INTRODUCTION
Making Data-Driven Decisions to Grow Your Business
- REPORT DESCRIPTION
- RESEARCH METHODOLOGY AND AI PLATFORM
- DATA-DRIVEN DECISIONS FOR YOUR BUSINESS
- GLOSSARY AND SPECIFIC TERMS
-
2. EXECUTIVE SUMMARY
A Quick Overview of Market Performance
- KEY FINDINGS
- MARKET TRENDS This Chapter is Available Only for the Professional Edition PRO
-
3. MARKET OVERVIEW
Understanding the Current State of The Market and Its Prospects
- MARKET SIZE
- CONSUMPTION BY COUNTRY
- MARKET FORECAST TO 2030
-
4. MOST PROMISING PRODUCT
Finding New Products to Diversify Your Business
This Chapter is Available Only for the Professional Edition PRO- TOP PRODUCTS TO DIVERSIFY YOUR BUSINESS
- BEST-SELLING PRODUCTS
- MOST CONSUMED PRODUCT
- MOST TRADED PRODUCT
- MOST PROFITABLE PRODUCT FOR EXPORT
-
5. MOST PROMISING SUPPLYING COUNTRIES
Choosing the Best Countries to Establish Your Sustainable Supply Chain
This Chapter is Available Only for the Professional Edition PRO- TOP COUNTRIES TO SOURCE YOUR PRODUCT
- TOP PRODUCING COUNTRIES
- TOP EXPORTING COUNTRIES
- LOW-COST EXPORTING COUNTRIES
-
6. MOST PROMISING OVERSEAS MARKETS
Choosing the Best Countries to Boost Your Exports
This Chapter is Available Only for the Professional Edition PRO- TOP OVERSEAS MARKETS FOR EXPORTING YOUR PRODUCT
- TOP CONSUMING MARKETS
- UNSATURATED MARKETS
- TOP IMPORTING MARKETS
- MOST PROFITABLE MARKETS
7. PRODUCTION
The Latest Trends and Insights into The Industry
- PRODUCTION VOLUME AND VALUE
- PRODUCTION BY COUNTRY
8. IMPORTS
The Largest Importers on The Market and How They Succeed
- IMPORTS FROM 2012–2023
- IMPORTS BY COUNTRY
- IMPORT PRICES BY COUNTRY
9. EXPORTS
The Largest Exporters on The Market and How They Succeed
- EXPORTS FROM 2012–2023
- EXPORTS BY COUNTRY
- EXPORT PRICES BY COUNTRY
-
10. PROFILES OF MAJOR PRODUCERS
The Largest Producers on The Market and Their Profiles
This Chapter is Available Only for the Professional Edition PRO -
11. COUNTRY PROFILES
The Largest Markets And Their Profiles
This Chapter is Available Only for the Professional Edition PRO- Brunei Darussalam
- Cambodia
- Indonesia
- Malaysia
- Myanmar
- Philippines
- Singapore
- Thailand
- Vietnam
- Lao People's Democratic Republic
-
LIST OF TABLES
- Key Findings In 2023
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Per Capita Consumption, By Country, 2018–2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country Of Destination, 2012–2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, By Country Of Origin, 2012–2023
-
LIST OF FIGURES
- Market Volume, In Physical Terms, 2012–2023
- Market Value, 2012–2023
- Consumption, By Country, 2023
- Market Volume Forecast to 2030
- Market Value Forecast to 2030
- Products: Market Size And Growth, By Type
- Products: Average Per Capita Consumption, By Type
- Products: Exports And Growth, By Type
- Products: Export Prices And Growth, By Type
- Production Volume And Growth
- Exports And Growth
- Export Prices And Growth
- Market Size And Growth
- Per Capita Consumption
- Imports And Growth
- Import Prices
- Production, In Physical Terms, 2012–2023
- Production, In Value Terms, 2012–2023
- Production, By Country, 2023
- Production, In Physical Terms, By Country, 2012–2023
- Imports, In Physical Terms, 2012–2023
- Imports, In Value Terms, 2012–2023
- Imports, In Physical Terms, By Country, 2023
- Imports, In Physical Terms, By Country, 2012–2023
- Imports, In Value Terms, By Country, 2012–2023
- Import Prices, By Country, 2012–2023
- Exports, In Physical Terms, 2012–2023
- Exports, In Value Terms, 2012–2023
- Exports, In Physical Terms, By Country, 2023
- Exports, In Physical Terms, By Country, 2012–2023
- Exports, In Value Terms, By Country, 2012–2023
- Export Prices, 2012–2023
Recommended reports
This report provides an in-depth analysis of the plastic extruder market in Asia.
This report provides an in-depth analysis of the plastic extruder market in the U.S..
This report provides an in-depth analysis of the plastic extruder market in China.
This report provides an in-depth analysis of the plastic extruder market in the EU.
This report provides an in-depth analysis of the global plastic extruder market.